Bench
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I found it necessary to give the little Dummy 13 figures a bench, so i designed one ;-)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dear 3D printing Fellows,
I found it necessary to design a bench for the Dummy 13.
I made a design in fusion360 and then printed it in PLA.
You can click the parts together and if you want, don't need to, use a little glue.
The screenshots show the time and how best to print the parts.
I'm quite fond of Tree support (organic) because it gives the least problems when removing it.
At the back and the seat, make sure that you print it STANDING UP with organic support.
I tried other ways myself, but that went wrong in terms of support, could not be removed when printing landscape.
Goes well, tune to speed if necessary.
Good luck and happy printing.
Bert