1 / 2
PS2 Fat USB-C decoy board power cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For use with a similiar USB-C decoy board.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 127
- Makes
- 0
- Views
- 1,084
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- I used these decoy boards: https://de.aliexpress.com/item/1005005515531468.html?spm=a2g0o.productlist.main.37.2e25IQdkIQdkCZ&algo_pvid=b8b2f3fe-a525-4b6c-98bb-d7b4306e61aa&algo_exp_id=b8b2f3fe-a525-4b6c-98bb-d7b4306e61aa-18&pdp_npi=4%40dis%21EUR%2112.54%213.64%21%21%2196.81%2128.07%21%40211b441e17177803120107015ecc52%2112000033376302199%21sea%21DE%214821900747%21&curPageLogUid=thEOwbqp7pw0&utparam-url=scene%3Asearch%7Cquery_from%3A
- The buck converter used was this one: https://de.aliexpress.com/item/32213232830.html?spm=a2g0o.order_list.order_list_main.91.6bf35c5fAvQ1vC&gatewayAdapt=glo2deu
After adjusting it to 12V, also check the potentiometer for the current (it is ok to set it to the maximum of 5A).
In this case you can just check the resistance between the leg in the middle and the outer leg without the adjustment screw over it, turn it until it shows ~0Ω. The potentiometer on this model have a resistance of up to 10kΩ.
- PS2 Fat peaks around 35W while in game playing of a HDD. While it uses 12V, it is advised to use it with 15V or more and a buck converter, since most chargers only offer a max of 3A.
- Added a version to use with a cable tie (up to ~4mm) for fixation (I also use a little strip of double sided tape in addition).