Prusa XL adjustable Filament Sensor Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable holder for the filament sensor which can optimitze the filament path in some situations.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 27
- Makes
- 0
- Views
- 402
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
With this mount you can mount the filament sensor on the side of the Prusa XL and adjust the tilt angle of the sensor.
The body of the adjustable holder can be mounted with the filament sensor slot-nut and screw.
To connect the main body and the adjustable holder I used M3 brass threaded inserts from CNC Kitchen. Also for the Filament Sensor and the adjustable arm.
You can adjust the angle and then tighten the screw to hold it in place. There are 20 positions to chose from.
To connect the filament sensor you need a longer cable which I build with the description from https://www.printables.com/model/802662-xl-filament-sensor-relocation-mount?_gl=1*faaby0*_ga*Nzc0Mjc0MDY5LjE3MDA2OTAxNDY.*_ga_3HK7B7RT5V*MTcxNjA2NDMzNS4zNy4wLjE3MTYwNjQzMzUuNjAuMC4w