Strain Relief for Micro Servo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add-on clip for micro servos to provide strain relief for the servo wires.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 16
- Makes
- 0
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Add-on clip for micro servos to provide strain relief for the servo wires. I've provided two versions of the model, one for cable-wrapped wires and one for exposed wires. Use a small zip-tie to secure the wires and an M3 x 10mm screw and M3 nut/locknut to secure the part to the servo body.
This was the servo the part was modeled on: https://amzn.to/3cfUJhp
(Mentioning because I found the body to beslightly larger than nominal micro servo dimensions by .25mm)
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
.2
Infill:
25%
Filament:
Atomic Filament PLA
Category: Hobby