Recalbox-JAMMA SSD Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Recalbox-JAMMA SSD Case
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 404
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Happy owner of a Recalbox-JAMMA, I wanted to put an old SSD with my Recalbox-JAMMA rather than buying an SD card for 2 reasons:
- the first: the lifespan of an SSD compared to an SD card.
- the second: the USB adapter is cheaper than an SD card.
I therefore offer you my creation which will be installed below your RecalBox-JAMMA.
You will need :
- 1 recovery SSD, which we ended up having quite easily (with a maximum height of 9.5 mm.)
- 1 SATA to USB 3 adapter, this one is really good and takes up little space.
- 4xM3 16mm screws and their nuts
- 8xM3 5mm screws to fix the SSD.
If you do a full install of Recalbox on the SSD and not just use it as a sharing folder.
Since the Raspberry Pi5 is powered by our candy cab, it will certainly be necessary to add the line “usb_max_current_enable=1” in /boot/config.txt for it to start.