Wltoys 12428 bellcrank steering FINAL

Hi, wltoys 12428/12429 owners, 

I believe you do know that steering is not perfect in those models, and here is the ultimate solution to resolve all the issues ;)

Enjoy, share your prints, suggest improvements, and be safe!

What you need as an extra

1. Two M3 bolts 13mm long from suspension (if you plan to change the stock) or search on Aliexpress by “M3 12428-0099”, I used this - https://s.click.aliexpress.com/e/_DlK7D6b
2. Two M 2.5 20mm bolts and two nuts. I used from there
   1. bolts - https://s.click.aliexpress.com/e/_DChSrTd 
   2. nuts  - https://s.click.aliexpress.com/e/_DmJzKkT 

Good to have: 

1. thread locker (I used a blue one)
2. print a model for vertical suspension (the current design should work with horizontal, but I didn't tested it that way)

Please don't forget to like the video - so I would know that this model is useful. 

Thanks in advance!

Update(2.11.2025):

I'd strongly recommend trying this approach - https://www.printables.com/model/1083069-wltoys-12428-steering-redesign-applying-parts-from

it is not a full 3d print solution just a base mounting plate, but using 4 usd items from Aliexpress is not too expensive. ;)