1 / 1
Neptune 4/ 4Pro Pen Plotter (REMIX) attachment
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attaches to the side of the Elegoo Neptune 4 or 4 Pro extruder assembly with the same screw, in 9, 12, 15, 17mm diameter
- Rating
- 4 / 5
- Likes
- 10
- Downloads
- 123
- Makes
- 1
- Views
- 1,039
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Print details:
- I orient the model such that the pen hole is vertical and the numbers are towards the bottom.
- Printed with PLA, 0.2mm, 2 walls, and 15% grid infill - takes approximately 70 min and 29g of filament
- I used supports to ensure that the holes perpendicular to the build plate had support.
Use:
- You need to remove the top right screw of the extruder cover, add the pen holder of your choice, and re-screw.
- If you are worried about the angle of the pen holder shifting during plots, you can use a thin double-sided tape to secure the plotter to the extruder cover.