Garden Hose Holder (Wall Mount)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€11.59 – €14.17 net (excluding VAT)
For file: Ender 2 Pro, 0.6mm nozzle, Geeetech PETG / hoseholder_7h8m_044mm_235c_petg_ender2pro.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €12.88 excluding VAT (range midpoint).
- Weight reported by the author
- 301 g
- Print time reported by the author
- 7.14 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wall mount hose holder for garden hose. Prints on the side and should not require supports.
- Rating
- 5 / 5
- Likes
- 958
- Downloads
- 3,683
- Makes
- 41
- Views
- 9,466
- Reviews
- 36
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
Wall mount hose holder for garden hose. Prints on the side and should not require supports.
NOTE: Four versions:
- One with angled screwholes so the front part won't be in the way when screwing into the wall.
- One with straight holes that should be accessible with a bit extension or a long screw driver.
- One with vertically aligned holes, so it can be mounted on a vertical stud in the wall.
- One without any holes - STEP format for custom holes.
Print Settings
Printer Brand:
Sovol
Printer:
SV04
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
40% Cubic
Filament: Extrudr ASA
Yellow
Notes:
Probably best to use a brim when printing to avoid lifting. At least when printing in ASA for UV-protection.
Category: Outdoor & Garden