Simple bed scraper
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.20 – €1.47 net (excluding VAT)
For file: Simple bed scraper_1h16m_0.30mm_210C_PLA_ENDER3.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.33 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.27 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple bed scraper with a hex pattern, to not use default metal scrapers on an softer surface
- Rating
- 4.5 / 5
- Likes
- 6
- Downloads
- 80
- Makes
- 4
- Views
- 217
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I made this scraper since I did not want to use a metal scraper and also because all other scrapers I found used questionable licenses
For printing I recommend a layer hight of no more than 0.4mm, personally I set it for me to 0.3mm. No support needed
Edit:
The normal version of this simple scraper has 3mm thick walls on the outside, the thicker version has 5mm thick walls, in case you need additional strength