Anafi Parrot - Propeller Guard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I remixed the leg protector from Trulala69 to make it a propeller guard. I recommend to print it with the guard laying…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I remixed the leg protector from Trulala69 to make it a propeller guard.
I recommend to print it with the guard laying on the table (as shown in the picture or upside down from the 3D display above) and the leg protector on the "air" using support of 60 degrees.
The scad file is available and uses the Anafi_Leg_Protector.stl as input. Make sure your this stl is in the same directory as the scad file.
Some parameters can be changed, but unfortunately I have not a lot of free time to make a clean scad file, feel free to contribute!
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
Yes
Infill:
1%
Notes:
I set the infill to 1% to ensure the walls of the leg protector are completely filled. The guard arc works well without infill since it is tubular.
Category: R/C Vehicles