1 / 3
Dwemer Gear - Remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two sided Dwemer Gear
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 55
- Makes
- 0
- Views
- 285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of a Skyrim Dwemer Gear that I found on thingiverse. When looking at the ingame model, I noticed that it was double sided and thin.
Printed the one in the images with Polymaker PLA+ Black at 0.2mm layer height, 10% infill with gyroid pattern. Overall filament used, including supports was around 140 grams and took around 15hrs.
In terms of post process;
- 80 grit sanding for the first round
- Initial filler used was,
- 2 layers of MTN Pro Grey filler primer
- 240 grit sanding before paint
- 1 coat of Rust-Oleum 2x Ultra Cover - Espresso Satin
- Shout out to @SilverrendProps for the advise for both the Espresso Satin base colour followed by the below Antique Rub'n'buff
- Sponge on some Rub'n'buff Antique Gold to the desired effect
- Spray a coat of sealant