SMOKIN-DARTH-hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
really cool picture of Darth Vader.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 52
- Makes
- 1
- Views
- 253
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 177.51x236.82mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Overture Cement Gray Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Cement Gray
At layer #9 (0.8mm) swap to Beige
At layer #19 (1.6mm) swap to Jade White for the rest.