Bench Power Supply
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting box for power supply and binding posts with switch.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 27
- Makes
- 0
- Views
- 347
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I had a LH-360W power supply from an old 3D printer that I was using to power a battery charger. I decided to print a mounting box for it and add some binding posts and a power switch. I forgot to dimension the cutout for the power switch before I printed it, so I had to improvise. I have fixed that in the .stl now. It's 13x28mm. There is a small clamp for the power cord designed for two M2 screws. Length will depend on how thick your power cord is. The power supply has three M4 mounting holes.
I designed it to be able to be printed in one piece with no supports. You might have to clean out a hole or two for the screws or binding post, but that just makes for a good fit. Saves time and filament too. I used 3 walls and 15% infill (it's mostly solid) with .6mm nozzle and .24 layers. It prints upright and I did use an inner brim to secure it to the plate. I printed in PETG-CF.