Planter #1 - Geometric Pattern Planter/Pot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Planter with a simple geometric design. Plates and drainage model. The planters can be resized.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 211
- Makes
- 2
- Views
- 555
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Planter with a simple geometric design and holder plate(s)
Two different Plates/bases are provided:
1- Rectangular double base
2- Circular single base.
Planters with drainage as well as non-drainage designs are provided.
The non-drainage pot(s) were tested with water for 48 hours and using the slicer settings below did not leak,
The planter is 75 mm height x 100 Width.
With the base, 80 mm height with a 215mm wide base.
No supports required.
The slicer settings for the base(s) and planters themselves:
SUNLU PETG White
The slicer settings:
.20 mm Strength and Generic PETG
Infill % - 100 , Rect
Wall Loops - 8
Top Shell - 8
Bottom Shell - 8
Seam: Aligned