Rotorman
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool for truing rotors on bicycles with disc brakes
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Use this to true the rotors on bicycles with disc brakes. I sliced it with 90% infill around the two slots and 15% elsewhere. The short slot is going to be the weakest part. My local bicycle shop is doing some testing of PLA, PETG and ASA versions. If those are not strong enough I will print more with nylon filament.
There is a void for a 3x18mm neodymium magnet so it can hang from a steel bike stand or tool rack. I inserted a pause in the gcode at a height of 4.7mm to insert the magnet. It will print without the magnet or you can comment out the void in Openscad.