The tiny cabin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a cute little cabin. It looks like made of wood. You can print just the cabin or also the rocky base. The…
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 108
- Makes
- 2
- Views
- 397
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Architecture & Urbanism
- License
- Creative Commons — Attribution — Noncommercial
This is a cute little cabin. It looks like made of wood. You can print just the cabin or also the rocky base.
The height of the cabin is 4.8 cm (1.9 inches). On my printer the cabin has less than 2 hours print time. Some simple glue work is required after the print.
If you are looking after a slightly smaller cabin, consider printing my "The tiny cabin (even more tiny)": https://www.thingiverse.com/thing:6617767
Enjoy printing this object.
Print Settings
Printer Brand:
Flsun
Printer:
Flsun V400
Rafts:
No
Supports:
No
Resolution:
0.2 mm layer heigth
Infill:
10 %
Filament: GIANTARM PLA
New Brown
Notes:
Please print the cabin itself and the two roofs in a brown colour. The chimney looks best in a silver colour. If you print the rocky base, it should be in a greyish stone colour.
Cabin assembly part 1
Glue the two roof parts onto the cabin. There are small notches to help you positioning the roofs. If you look at the cabin from the front, the roof part with the chimney is to the right. Please look at the pictures.
Cabin assembly part 2
Glue the chimney onto the roof.
If you print the rocky base, no glue is required to position the cabin on the rock, as there are 4 posts to hold the cabin in place.Category: Buildings & Structures