1 / 4
K-Cup Dispenser Base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dispenser piece designed to be glued to 2" pvc pipe to make a wall mounted way to hold Kcups.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 0
- Views
- 437
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Standard Digital File License
I have an old cheap printer so I don't have any good print tips. It doesn't need to be super strong so I have been printing with around 20% infill. I use PLA mostly but have printed in ABS. I built my dispenser by cutting three 12" sections of 2" pvc pipe, gluing the printed ends to the pipe, then making two wood pipe holders from 1x4 oak. It takes a 2 3/8" hole saw, some regular drill bits, and ¾" #6 screws (6 of them). I ended up covering the ugly pvc with craft paper.