1 / 6
Baseus 65W USB-c charger mount for Niko blank faceplate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for Baseus 65W USB-c charger inside a Niko blank faceplate.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 489
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A mount for Baseus 65W USB-C charger inside a Niko blank faceplate.
It's too large to fit in a standard wall outlet, but with some imagination it's still usable in other places.
I've printed it with the front on the buildplate. You could use the textured or satin sheet for a different texture.
First fit the mount inside the Niko bracket. It should click in place.
Then gently put the charger inside the mount and use some tiewraps to secure it.
Perfectly flush finish. The charger is held in place so it stays where it is while unplugging the cable.