Baseus 65W Charger Table top mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A table mount / grommet for the Baseus 65W USB-c charger
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 27
- Makes
- 0
- Views
- 293
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Started as a remix, but ended up being a complete redesign.
Needs M3 screws and M3 heated inserts in the bottom.
Should fit any hole from 61mm to 69mm.
Two options to mount.
- First put the charger in the base, screw the bottom on it. Then put the charger and base into the hole. Use the nut to fix it all together.
- Or you first put the base in the table, fix it with the nut. Then add the charger and screw the bottom lid.
The first option is the easiest since there is no need to screw in small screws while sitting under the table / desk.
First version was without slot in the nut, which prevented from using the easy mount option.
Latest version has a slot so you can screw it on even if the charger is already in place.
The blue nut is the newest version.
Perfectly flush finish. The charger is held in place so it stays where it is while unplugging the cable.