1 / 1
250mm Segmented Circle Mold
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
250mm diameter segmented circle for small printers. Made for pouring tools for telescope mirror making.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 34
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A 50mm tall, 250mm diameter segmented circle with lap joints. This was made for pouring tools for telescope mirror making, with a filleted edge so it can be set against the mirror in question to produce a matched curve.
Print 4 of these arcs to produce a 250mm ID circle with a height of 50mm. Be sure to print flat side down.
Included gcode is for PETG, but has a layout I found reasonable, and fits on a prusa mini+. Everything is scalable, and the thickness of 10mm means it is rather flexible for downsizing.