LGB 94005 Car
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are the upper parts for the LGB 94005 G Gauge DEV Low-Side Gondola LN. You need to have an under carriage.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 273
- Makes
- 0
- Views
- 1,361
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are the (upper) parts for an original garden model railway car LGB Nr 94005.
You need to have the undercarriage yourself.
Alll parts are designed and split so that you can print it without supports with exception of the railing. Here you need some support to recreate the round form. (see the 3mf file). After printing glue the parts together.In the railing parts there are small holes where you can put in2 3mm pieces of filament to align the parts during gluing.
Print the bigger parts with PLA, 0.2 layer and 0.4 mm nozzle. The smaller parts I printed with a 0.25 nozzle and very small layer height. You probably have to experiment a bit to get the best result.