1 / 3
Combination square and double square holder, Mallet holder for 3/4 french cleat
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It’s a sturdy combination square holder. Maybe too much? But squares are not cheap. The holder should be sturdy.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 42
- Makes
- 0
- Views
- 277
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This holder construct from FreenchCleatBase and CombinationSquareHolder.
HolderBase is for customizing. You can customize whatever you want.
It may be tight to slide in the holder to the base. I recommend to tap lightly with a rubber or plastic hammer.
No need supports, rafts and brim. I used 15% infill and it took 16 hours printing on my elegoo neptune 3 pro.
Update:
2024-05-23 - Added Mallet holder
The picture mallet is Wood Is Good 12 Oz. The handle diameter is 47mm. The hole diameter is 49mm.