Eero 6 mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Erro 6 wall mount with space for airflow.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 60
- Makes
- 0
- Views
- 483
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Remixed lukeskymaker Erro mount. Took off the side plate, put a hole in the middle to try and dissipate some heat. If you have these you know they get hot. Also added spacers in the rear to bring it out from the wall a bit for heat distribution. Also made the walls thicker, original version was warping due to the heat the Erro was putting off.
Erro-mount-2.0.stl - has a pattern in the rear and would need supports. * I have not tried to print this one.
Erro-mount-3.0.stl - is just an open hole supports are suggested on the large opening. I opted not to do supports and you can see some issues in the pics but it didn't fail and its an easy fix.
Print Settings
Printer Brand:
Longer
Printer:
Longer LK5 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.28
Infill:
25%
Filament: Esun PLA
milk white
Notes:
I printed at .28 layer height (low quality) to save some time.
V3 print took little over 13hs at 50mm/s
Category: Other