1 / 3
Mailbox
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Playground mailbox print-in-place Supports only needed for the holes in the back This is a work in progress
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 91
- Makes
- 0
- Views
- 865
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
Recommended print settings:
PETG
0.25mm Structural on 0.4 nozzle
Nozzle temp first 3 layers 230°C, otherwise 240°C
Print bed 80°C
min 4 perimeters, 4 layers top and bottom
gyroid infill 10%
Provided Prusa XL gcode is configured for extruder 5 as main extruder, and extruder 1 as secondary extruder. In my case loaded with yellow and black respectively.
First print failed and I did not have enough yellow filament left, so I made this white and yellow version.