1 / 3
Raspberry Pi HQ Camera Case -- Cable INSIDE
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified the Adafruit RPi HQ case so the cable fits inside, made the PCB board a bit sturdier, added 12mm washers.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 106
- Makes
- 0
- Views
- 511
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
I made a few modifications to the nice Adafruit design:
- I thought the camera cable hanging out was an unsightly blemish on an otherwise nice design, so I made the back cover a bit bigger to accommodate it. You have to fold the cable, but it fits. I didn't bother to make a better clip for the back, so it may need a bit of tape/glue. Mine seems to hold together OK, however.
- I made the PCB board mount a bit sturdier. With the skeletal mount provided by Adafruit, handling the camera by the actual case put a huge amount of stress on the 1-2 mm of plastic holding it together; it was flexing and close to breaking. So I made it better.
- I added 12mm standoff washers, in case (like me) you don't have the standoff bolts and just want to put it together with normal bolts from the nearest hardware store.
I included the fusion 360 file. It complains about some buggy features in the timeline but it seems to work regardless.
Please feel free to comment if you have any feedback/questions.