1 / 3
Dwemer Scrap Metal
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Double Sided, Dwemer Scrap Metal made from screenshots taken whilst playing Skyrim
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 64
- Makes
- 1
- Views
- 312
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The make in the photo was;
- Printed on an Ender 5 plus
- 0.2mm layer height
- 2 perimeters
- 5% infill
- 11.5hrs print time
For post processing, see below steps if you want to some tips on replicating the same look in the photos.
- 80 grit sanding for the first round
- Initial filler used was Rosco Foamcoat
- After mixing the Foamcoat within the tub, I separated a small amount and every so often dipped my brush in was water, as I brushed the Foamcoat on
- Let this dry
- 320 grut sanding before filler primer
- 1 coat of MTN Pro Grey filler primer
- 400 grit sanding before paint
- 1 coat of Rust-Oleum 2x Ultra Cover - Espresso Satin
- Shout out to @SilverrendProps for the advise on how to achieve the Dwemer look in the photo
- Sponge on some Rub'n'buff Antique Gold to the desired effect
- Glue the parts together
- Its easier to colour the S1/S2 & S2/S3 Connectors, as well as the top & bottoms for each section before assembly
- make sure to use the spacers
- Spray a coat of sealant