1 / 1
Optical Illusion Pinwheel with Bearings and High Quality Mesh — image 1

Optical Illusion Pinwheel with Bearings and High Quality Mesh

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two opposite wheels spin smoothly in different directions, giving a mesmerizing effect. Small, hand-held size.

Rating
0 / 5
Likes
13
Downloads
72
Makes
0
Views
435
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Banana not included. This is a pinwheel with two opposing sides that spin in opposite directions.

Inspired by the one by Dalpek, I made a new one with some improvements:

  • Embedded bearings
  • Mesh is higher quality (no polygons visible)
  • Size is more reasonable – the original seemed wastefully large
  • Handles are separate so you can print two sides without supports and glue them together

Items Needed

  • 2 bearings of size 695 (search for 695RS or 695ZZ on your local online markets).  They are readily available worldwide and cost pennies.  The dimensions are 5x13x4mm. 
  • Superglue
  • Electrical tape (optional)

Instructions

  • Print A and B versions of the propellers.  I recommend something soft like TPU.  DO NOT print one of them twice; they are different. 
  • Do an M600 “color change” or a pause print right before the bearing enclosure is printed over. (Around 7.75 mm height)
  • Insert the bearings.  They should fall in place nicely.  If there is some sideways slack space, I recomment wrapping the bearing with electrical tape to make it snug.  (just cut off the excess from the top/bottom.  Make sure it falls in fully and nothing is poking out the top for the nozzle to crash into.
  • Print handles and glue them together.  Optionally change colors after 1mm to get the text to pop out.
  • Handle should snap into propeller bearings snugly, but feel free to add a tiny bit of superglue to prevent it moving.  Just don't glue the bearings shut (lol)

I included the source in case you want to modify it or if you're a monster who wants to remove my name from the handle (how dare you).

Please leave a comment if it works for you!