Artillery Sidewinder X1/X2/Genius/pro quick change bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Artillery Sidewinder X1/X2/Genius/pro quick change bracket
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 36
- Makes
- 0
- Views
- 681
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
this is a quick change extruder bracket for artillery printers.
you will need 3 dowel pins with m3 thread (6mm):
https://s.click.aliexpress.com/e/_DFialPf
for the roller wheel you need a longer M5 (30mm) screw to hold the bracket but it is recommended to use shoulder bolts so the bearing doesn't roll on threads:
https://s.click.aliexpress.com/e/_Dkl5JQ9
if the bracket is rubbing on the x axis you may need to add a washer to the bottom v-slot wheel.
i found that the eccentric nut is shorter than the spacers so the carriage is not fully parallel to the x axis, adding a 1mm washer fixes that.
printing orientation:
