1 / 1

SUNSET-SAILING

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Source: Printables
Category: 2D Plates & Logos
License: Creative Commons — Attribution — Noncommercial — Share Alike

Details Makes & comments Remixes Collections

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 167.86x235mm in size
You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLAMAX Blue Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 2.5
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA White Transmission Distance: 6
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Blue
At layer #12 (1.04mm) swap to Red
At layer #14 (1.2mm) swap to Mandarin Orange
At layer #19 (1.6mm) swap to White for the rest.