1 / 1
M25 Jam Nut
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Jam nut for m25 enlarging lens boards
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 80
- Makes
- 0
- Views
- 282
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
I have a bunch of enlarger lenses that I kept after upgrading enlargers and I could not find anything to mount my m25 lenses to anything, so they just sat.
Then one day I got a 3D printer and when going through my darkroom stuff asked myself if it could be done, not if it should. So here it is, the elusive jam nut that I haven't been able to find locally or online for a reasonable price.
I'll likely make a lens board to mount my m25s onto a beseler style lens board and also for my Omega C760.
Prints no supports, 20% infill, at .2