koffiezetapparaat filter hersteld, coffee maker filter restored.
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.13 – €0.16 net (excluding VAT)
For file: 02-5mm-koffie filter_0.2mm_ASA_MK3S_8m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.14 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 7.8 min
- Source material
- ASA
- Estimate material
- ASA
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Klein pinnetje om de filter terug in de houder te kunnen plaatsen. Small pin to place the filter back in the holder.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Het gaat om een klein pinnetje van 5.5mm doormeter en 20mm lang. Stelt dus echt niets voor, maar mijn koffiezet werkt weer. Tijdens de afwas is het steun pinnetje afgebroken dat de koffiefilter op zijn plaats houd. Ik heb dan waar het afgebroken was het uit-geveild tot het mooi rond was. De afmetingen genomen, getekend en afgedrukt. Nu nog wat secondelijm en alles zal weer werken, en niemand kan het zien ;). De foto's maken het meer duidelijk.
It is a small pin of 5.5mm diameter and 20mm long. So it's really no big deal, but my coffee maker is working again. While washing the dishes, the support pin that holds the coffee filter in place broke off. I then auctioned it off where it had broken off until it was nice and round. The dimensions were taken, drawn and printed. Now just add some superglue and everything will work again, and no one can see it ;). The pictures make it more clear.