1 / 4
Shining Rayquaza - HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One of my favorite pokémon cards, the legendary rayquaza made in HueForge.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 75
- Makes
- 0
- Views
- 458
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I used the following colors and settings:
This card has a size of 160x224,80mm. I reduced it to 60%, but without changing the Z height. This must be 100%.
Layer height is 0.08mm with a base layer of 0.16mm and 100% infill.
Filament:
- I started with Elegoo PLA Black
- At layer #11 to PolyTerra PLA Fossil Grey
- At layer #15 to PolyTerra PLA Muted Red
- At layer #16 to PolyTerra PLA Savannah Yellow
- At layer #22 to BambuLab Matte Ivory White
I recommend a slightly darker gray than the Fossil Gray, but that was the only gray I had.