Interceptor Saber Hilt - Proffie+Neopixel Compatible (LGT Core / Pattern)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D-printable saber hilt for LGT's chassis. Neopixel/Proffie or Xenopixel are supported. Baselit not recommended with PLA
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 461
- Makes
- 3
- Views
- 3,479
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial
Custom saber hilt ready for electronics and blade. This fits the LGT core module. Pictured is the LGT Proffie Core and 1" Neopixel blade from Darkwolf Custom.
I specifically recommend a 32" blade - normal filaments do not give the hilt enough weight for a 36" blade to feel balanced in the hand. If you are printing metal fill or other high-density filaments this may not apply.
Also requires 4x M4x6 or M4x8 set screws to keep the blade in place.
From testing this hilt can stand up to light dueling / swinging without issues.
Slicing is validated in Prusa Slicer. Other engines may require sending this to Netfabb or another repair tool first.
The threads are backwards but I noticed this last minute and was unable to fix it.
License caveat: This is BY-NC-SA, but using this file purely for its measurements and discarding the mesh is allowed unconditionally (hole sizing, hole patterns, overall length, diameter)