Voron 2.4 Multi-Tool HEPA/Carbon Filtered Exhaust [Beta]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement v2.4 exhaust housing/grate supporting 2-6 tools.
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 170
- Makes
- 1
- Views
- 1,735
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Exhaust housing, with carbon/HEPA filtering, to jam your multitool birds' nest into so we can pretend we have good wire management! Supports 2 to 6 tools.
BOM (not including what you should have from the stock 2.4:
- 2-6x Molex Micro-Fit 2x2 connector pairs and the associated pins
- A cup of Voron spec (M3x5x4) heatset inserts (16x+ ?)
- 1x Roomba 800/900 series HEPA filter
- NON-ACID-WASHED carbon pellets
- 8x m3x4 any cap screw
- 2x m3x8 any cap screw
- The rest of the wiring stuff that's probably really specific to your setup
Instructions:
- Print
- 1x Housing
- 1x Housing cap
- 1x Grate
- 1x Lid (Rear cover) from WesPless' files
- 1x Filter cartridge !!! WARNING !!! Scale it to 10% in slicer. I couldn't do it because my Fusion crashes when trying to scale it down. Working with .stl files sucks.
- Heatsets
- 12x into the housing
- 4x into the back of the filter cartridge
- Make your birds' nest & assemble in whatever order your heart desires
- The female connectors go on the MCU-side and should slip snug into the grate. Fusion file available for modification
- Make sure you use a non-acid-washed carbon
- I prefer to insert the Roomba filter with the flag at the bottom
Might want to check these out too:
https://www.printables.com/model/885536-molex-microfit-2x2-strain-relief
https://www.printables.com/model/880095-btt-sb22092240-xt3022-replacement-shell
LICENSING
Yeah so while I want to, I can't give full rights because the remix sources are more restrictive. I give you full rights to do whatever you want to anything that isn't marked as remix in the files section since I made those myself.