Nail Gel Holder and Organizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stackable tray system for holding and organizing 20 x 5g nail gel pots (per tray)
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 57
- Makes
- 0
- Views
- 415
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a stackable tray system for holding and organizing 20 x 5g nail gel pots (per tray).
For pot size: 5g or Ø36mm (≦ Ø37mm)
Fits: 5 x 4 = 20 pots
Dimensions:
width 230 mm
depth 163mm
height 18mm (35mm w. feet)
Stackable
Printing the tray: The tray should print fine without infill. If the top layers don't come out clean, use a bit of lightning infill or maybe 5-10% gyroid to improve the printability of the top layers.
Printing and assembling the feet: The feet should print fine without infill and without supports. Like above, if the top layers don't come out clean, use a bit of lightning infill or 5-10% gyroid. If you want to use the feet (for making the trays stackable), print at least 8 per tray and glue them onto the bottom of the tray as shown in the above image. You can alternatively glue the feet to the top side of the tray, it doesn't make a difference for stacking, but it will visually not look as clean.