3D-scan turning table
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The goal of this project was to make a simple hand-driven 3D printable turn table for 3D scanning of small objects.
- Rating
- 4.778 / 5
- Likes
- 85
- Downloads
- 816
- Makes
- 11
- Views
- 4,162
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
The goal of this project was to make a simple 3D printable turn table for 3D scanning of small objects.
The model is hand-driven, by turning a knob that drives a worm drive with an attached scanning table. For 3D scanning using Photogrammetry, the notch in the knob can be used to estimate the revolution of the scanning table. For a full 360 degree revolution of the scanning table, the knob has to be turned fully for 60 times.
To obtain a high gear ratio, I used a worm drive instead of spur gears. I followed the tutorial by Igor Gaspar from My Tech Fun to model a worm(screw) and worm wheel (or gear). The five parts in this model were designed using the ‘Not for commercial use’ free version of Autodesk Fusion 360. I used an offset of -0.2 mm for parts such as rotating bodies, gear teeth, or threads. The five parts can be printed without supports.
Print Settings
Printer Brand: Artillery
Printer: Artillery Sidewinder X1
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Filament: Innofil3D PLA
White, Black & Red
Notes:
Slicing was performed using Ultimaker Cura 5.6.0.
Files description
Base_plate. Rectangular base with attachments for worm and worm gear.
Worm. Rod with teeth, driving the worm gear, and threads attaching a worm knob.
Worm_turning_knob. Round handle with a notch that attached to the worm with threads.
Worm_gear. 60 teeth gear, driven by the worm, and placed on the base. Attaches to the scanning table with threads.
Scanning_table. Circular base for objects for 3D scanning. Attaches to the worm gear with threads. Updated on 23-04-2024 to increase space (+ 5 mm) between the worm bracket on the base plate and the scanning table.
Category: 3D Printing