1 / 1
HueForge Gengar Red Splatter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Three filament print amenable to manual color changes
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 66
- Makes
- 0
- Views
- 352
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Designed for 0.4 nozzles.
Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm
The Model is 150x200.62mm in size
You may print at higher layer heights below the Min Depth of 0.5mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filament swap instructions:
- Start with black/black adjacent
- At layer 5 (0.6mm) swap to white
- At layer 12 (1.3mm) swap to red to finish print
Actual filaments used in photographed print: CookieCad PLA Dark Magic; Overture PLA Matte White; PLA+ Sunlu Red
Image sourced from emojisky.com with non-commercial license