Yet Another Purge Bucket (YAPB) for Bambu Labs P1/X1 Printers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Smaller container to catch purged filament (out the so called "poop chute"), uses provided scraper magnet to attach.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 61
- Makes
- 0
- Views
- 323
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Public Domain
There must be hundreds of these so called "poop buckets" for Bambu Labs P1 and X1 3D printers. Yet, I couldn't find one that was just right. Not too big, simple magnet attachment, won't block chute, and looks good.
I like this size, about 80 mm by 80 mm by 140 mm: it'll probably hold 100s of filament purges and it takes a second to dump out. I didn't want some giant bucket snaking around the printer, and I didn't want to spend 5+ hours printing it. The walls are 1.6mm thick for faster printing and less material but still good strength (not like this thing undergoes any major force). I added fillets inside to strengthen where the bottom attaches to the sides and for the inner corners of the bucket. For extra safety, I added a back stop swooping up, since sometimes those purged filament bundles come out pretty quickly.
A really nice feature is that I used one of the two magnetic strips Bambu included with the printer to build a scraper. I hang my scraper on the metalic back of my PIS, so I only needed one magnet for it. This bucket was a great use for the leftover magnet I already had!
It took 2.5 hours to print with a 0.4 mm nozzle at "0.2 mm Standard" default settings. I used Matte Black PLA to match the P1.