Pointy Haired Boss - Onepiece
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pointy Haired Boss, from the comic strip 'Dilbert' by Scott Adams.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 64
- Makes
- 0
- Views
- 456
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a onepiece version of the Pointy Haired Boss (PHB) based on my multi-part PHB model that I've previously posted.
Since I do not have an SLA printer, I teamed up with maker Kyler Stern to do the printing and painting.
I converted my multi-part model to a onepiece model for SLA and FDM printing. Kyler then proceeded as follows:
Scaled for his preference,
Print size: 100% / Scale: 75.75mm or 2.98 inch
Printer: Anycubic Photon M3
Resin: Anycubic Water-Was Resin+ Grey
Layer Thickness: 0.05 mm
Print time: ~ 5 hours
Hollowed upper body but not legs.
***************
Other notes regarding the supplied STL file:
For FDM and SLA printing, size the STL file as needed for your purpose and add Slicer supports.
Enjoy!