Shrub Spacer - Adjustable Spacer For Nexus Pro X
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adjustable spring spacer for the Dart Zone Nexus Pro X!
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 131
- Makes
- 0
- Views
- 773
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Introducing the Shrub Spacer, an adjustable spring spacer for the Nexus Pro X nerf blaster! This screw spacer allows for finer tuning of performance, adding between 18mm-28mm of precompression. The Screw portion features a square profile that fits snugly into the geometry inside the buffer tube of the NPX, ensuring that the spacer won't move over repeated use.
I recommend printing both parts at a resolution of 0.12 mm or lower. Due to the limited space some walls are as thin as 0.6mm, so I recommend printing this in a filament with good inter-layer adhesion! High temperature and slow printing speed can also help with this.
This design is heavily inspired by the excellent adjustable spacer for the Game Face Trion, created by Blasterface. Check that out here!
Enjoy!