16cm Carpet Nozzle for 35mm Vacuum fittings
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€7.44 – €9.09 net (excluding VAT)
For file: carpet-nozzle-remix_0.4n_0.2mm_PETG_MK4_10h16m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.26 excluding VAT (range midpoint).
- Weight reported by the author
- 66 g
- Print time reported by the author
- 10.27 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Much enlarged and widened remix of 3d7r1x Vacuum Carpet Nozzle. With added stabilizers.
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 278
- Makes
- 1
- Views
- 886
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of the Vacuum Nozzle by @3d7r1x to 16cm intake width for much speedier work on large carpets and textile furniture.
Stabilizers added to prevent deformation of the nozzle from suction forces.
Printing Advice:
Bed Adhesion:
- Use a large rim to ensure good bed adhesion.
Material Recommendation:
- Ideally, print with transparent material to see the satisfying result of dirt and water being extracted in real-time.
- This transparency allows you to adjust the speed at which you drag the nozzle based on whether water is left in the nozzle or if it dries up.
Printing with Transparent PETG:
- For the clearest results, print very slowly, around 15 mm/s.
- Increase the flow rate slightly for some controlled over-extrusion. This helps fill the tiny gaps between the lines for an even clearer finish.
Important Note:
- Be mindful not to overdo the adjustments. We still need the 35 mm fitting to function correctly.