1 / 4
Arm Boom Replacement for Coffee Machine Bialetti Mokona
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for Bialetti Mokona arm boom. This model is for the boom only, you will need the original filter and handle.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I quickly designed this to replace a broken arm boom.
⚠ Required Hardware: You will need the original filter, handle, and cap. Additionally, you will need an M5x40 mm screw - a longer screw is necessary to ensure the 3D printed joint is robust enough.
🖨 Printing Instructions:
- Material: PLA
- Orientation: Print vertically with the filter side facing down.
- Layer Height: 0.20 mm
- Infill: 30%
- Walls: 5
♥ If you find this model useful, please leave a comment! ♥