1 / 3
Holder for Star Wars coasters
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Star Wars logo coaster holder.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 46
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Star Wars logo coaster holder designed in Oneshape.
The holder can hold up to 7 coasters with dimension: 90 mm diameter and 2.6 mm height
Print time is more or less around 2h at 0.2 layer heigh (0.4 mm nozzle).
Print time is more or less around 2h15m at 0.16 layer heigh (0.4 mm nozzle).
Print parameters:
- Layer height - 0.20 or 0.16 mm
- Perimeters - 3
- Infill - 10% is sufficient
- Brim - NO
- Support - NO
- Raft - NO
- Filament type - PLA or any
Could be printed even in multicolor without MMU, AMS or similar.
For multicolor print:
When printing at 0.2 layer height: put the printer in Color Change mode(G-code M600) at layer 10 and then change filament
When printing at 0.16 layer height: put the printer in Color Change mode(G-code M600) at layer 12 and then change filament