1 / 1
Ninetales Keychain
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
Ninetales keychain based on the official art. Made at the request of a friend. Can be printed in one or multiple colors. Measures 60 x 65mm.
Multi Color Instructions:
You will need four colors of filament white, black, beige, and orange.
You will need to change filament three times as instructed below:
- Start the print with white
- Change to black at layer #16 (3.2mm)
- Change to beige at layer #18 (3.6mm)
- Change to orange at layer #24 (4.8mm)
Recommended Print Settings:
- PLA
- .4mm Nozzle (Or smaller)
- .20mm Layer height
- 30% Grid pattern infill
- Top solid layers = 6
- Perimeter generator = Arachne
- Perimeter transitioning threshold angle = 59°
It is important to make sure the Perimeter transitioning threshold angle is set to 59° otherwise there will be gaps in the perimeters at sharp angles.