1 / 5
Pivoting Shell Collector - Colonel Wasp Firefly
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple pivoting shell catcher for the Colonel Wasp Firefly nerf blaster!
- Rating
- 4 / 5
- Likes
- 13
- Downloads
- 57
- Makes
- 1
- Views
- 887
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a shell catcher for the Colonel Wasp Firefly, to prevent the hassle of littering shells all over the field! The catcher is on a swivel to allow easy access to the breech and shell bag. Field tested and very reliable!
I recommend printing this in strong filament with 4 or more walls and 35% infill or more. Because the pivot points are at the layer lines, I do not recommend printing this in silk filaments.
Required Hardware:
- 2x M5 screw, 30mm long
- 2x M5 nut
- Mesh bag
Also referred to as a brass catcher, brass collector, shell collector, shell bag, or shell trap.