1 / 1
Exploding Kittens Box Front Plate (Hueforge)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A front plate for a printed box for exploding kittens crated in HueForge
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
I modified the OpenScad code for the customizable card game box in order to have the cap and box line up flat.
Printed this front plate i created in HueForge.
I used prusaslicer to cut the plate where the cap and box meet. You might also need to scale the model in X and Y direction to fit the box you want to attach it to
For printing the plate you need to use the following settings:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You need the following filament swaps:
- Start with Red
- At layer #9 (0.8mm) swap to Orange
- At layer #14 (1.2mm) swap to Yellow
- At layer #20 (1.68mm) swap to White for the rest.