Darth Maul with Double Red Lightsaber
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Darth Maul with Double Red Lightsaber Hueforge
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 111
- Makes
- 3
- Views
- 557
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Standard Digital File License
I actually do print all of the models I upload and that takes a time and filament.
Visit my Patreon (in bio or http://patreon.com/JustBe3D) If you are interested in *exclusive* FREE and members only models or a commercial license to sell your physical prints of my models.
As I can only upload models slowly visit https://makerworld.com/en/@user_2108045257 if you're interested in my full free collection.
Can be rescaled just remember not to change the Z axis.
I print with a variable layer hight but just uploaded the standard 0.16 base with 0.08 layer heights.
I put a single layer of black under my red. I think it makes the red look deeper and move vibrant, But it is not required..
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Space Gray Transmission Distance: 1.4
PLA Overture White Transmission Distance: 4
PLA Overture Red Transmission Distance: 8.2
PLA Overture White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Space Gray
At layer #15 (1.28mm) swap to White
At layer #17 (1.44mm) swap to Black
At layer #18 (1.52mm) swap to Red
At layer #29 (2.4mm) swap to White for the rest.