1 / 4
Air Purifier - "Old Mammoth" model — image 1
1 / 4

Air Purifier - "Old Mammoth" model

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

DIY air purifier elements, with IKEA filters / Eléments pour purificateur d'air DIY, avec des filtres IKEA

Rating
0 / 5
Likes
14
Downloads
24
Makes
0
Views
731
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

29/05/2023: Upload of the old model, an improved version will be updated shortly.

29/05/2023 : Upload de l'ancien modèle, une version améliorée sera mise à jour très prochainement.
 

-----------------

English :



Element for making a DIY air purifier.
Suitable for air purification against aerosols produced by breathing, against wood dust, against fine particles up to 10 microns.
Designed primarily to combat epidemics of Covid-19, it is recommended to use filters in combination with masks and vaccination.

Panda

  • ~176€, 948m3/h, 44db at 1m, 81,5x36x37.2cm, ~5kg
  • For 6 air changes per hour (if public not masked): 60m². 
  • Usage: Placed on the ground, on a table ; Dismountable
  • Time: 80mn of assembly and 13h of 3D printing

Parts to be purchased :

  • 16x Arctic P14 Fans (6€50 if bought by pack of 5; otherwise 11€ each) : Arctic site
  • 6x HEPA filter STARKVIND IKEA (10€) : IKEA site
  • 2x 3pin x8 splitter (1,50€) : Aliexpress 
  • 2x Splitter Molex - 2x Molex (1€) : Aliexpress
  • 1x Power supply 12V 3A AC-Molex (3.50€) Aliexpress
  • 1x On-Off button Molex-AC (2€) : Aliexpress
  • 120 screws M5 ~8mm
  • Optional: 1x battery 12v 31Ah DC-DC (from 9€ to 15€) : Aliexpress

Parts made by 3D printer:

  • 13h printed with a Flsun V400; 558g / 157m of filament for the set
  • Print 4x file MammothA; 2x MammothB; 2x MammothC; 2x MammothD; 2x MammothE; 12x Square; 28x Rectangle; 4x Foot20cm

Assembly:

  • General note, screw all fans with their white logo facing inwards
  • General note, orient the fan so that the power cable exits to one side of the block, this side will be the bottom of the air purifier.
  • Place 8 fans with the white logo facing inwards, forming a 2x8 rectangle. Using 3x4 screws and 3 Square elements, screw on the central 4-fan sections. Repeat the operation on the back of these 8 fans with 3x4 other screws and 3 other Square elements.
  • On the side where the white logos are visible, screw 16 screws and 8 Rectangle elements into each screw hole between 2 fans.
  • On the side where the white logos are NOT visible, use 3 screws, 1 Rectangle, 1 MammothD and 1 MammothE to screw in the 2 fans on one of the short sides of the fan rectangle, this side becoming the bottom of the air purifier. Using 3 screws, screw 1 Rectangle, 1 MammothB and 1 MammothC to the other side of the fan block. With 12 screws, screw 2 MammothA onto the central parts of the two long sides of the fan rectangle, and connect them to the other parts of the MammothB/C/D/E with the Rectangles. Always screw in this direction: screw => rectangle => MammothB/C/D/E => fan.
  • On one of the fan blocks, place the filters with the black foam facing the inside of the purifier. Then place the other fan block so as to hold the whole assembly in place.
  • Insert the 4 Feet into their slots and turn a quarter turn (you can repeat the operation to remove them).
  • On each side, connect the 3-pin plugs to the 3-pin splitter, then these 2 splitters to 1 Molex splitter, then to the knob, and finally the knob to the power supply or a battery.
     

Maintenance:

  • 6 months if used in standard condition H24/7-7 for a filter, replacement for 10€ each filter
  • 10 years for fans

Annual consumption :


Peak hour electricity price at €0.246 per MW/h (France) + €60 filters for every 300 days of use (10 months).

  • School use (8h/day - 182 days/year): €24.94
  • Office use (10h/day - 253 days/year): €34.94
  • Business use (10/day - 300 days/year): €49.91


--------------------------------------------------

Français :
 


Eléments pour la fabrication d'un purificateur d'air DIY.
Convient pour l'assainissement de l'air contre les aérosols produits par la respiration, contre les poussières de bois, contre les particules fines jusqu'à 10 microns.
Conçu principalement pour lutter contre les épidémies de Covid-19, il est recommandé d'utiliser les purificateurs d'air en combinaison de masques FFP2/KN95 et à la vaccination.

Mammouth :

  • ~176€, 948m3/h théorique d'air filtré par heure (CADR), 44db à 1m, 81,5x36x37.2cm, ~5kg
  • Pour 6 changements d'air par heure (si public non masqué) : 60m²
  • Usage : Posé au sol, sur une table ; Démontable
  • Temps : 80mn d'assemblage et 13h d'impression 3D

Pièces à acheter : 

  • 16x Ventilateurs Arctic P14 (6€50 si acheté par pack de 5 ; sinon à l'unité 11€) : site d'Arctic  
  • 6x filtre IKEA STARKVIND (10€) : site IKEA
  • 2x Répartiteur 3pin x8 (1,50€) : Aliexpress 
  • 2x Splitter Molex - 2x Molex (1€) : Aliexpress
  • 1x Alimentation 12V 3A AC-Molex (3,50€) : Aliexpress
  • 1x Bouton On-Off Molex-AC (1,30€) : Aliexpress
  • 120 vis M5 ~8mm
  • Optionnel : 1x batterie 12v 31Ah DC-DC (de 9€ à 15€) ; 80mn de batteries : Aliexpress

Pièces fabriquées par imprimante 3D :

  • 13h imprimé avec une Flsun V400 ; 558g / 157m de filament pour l'ensemble
  • Imprimer 4x le fichier MammothA ; 2x MammothB ; 2x MammothC ; 2x MammothD ; 2x MammothE ; 12x Square ; 28x Rectangle ; 4x Foot20cm

Montage : 

  • Note générale, visser tous les ventilateurs avec leur logo blanc vers l'intérieur
  • Note générale, orientez le ventilateur de façon à ce que le câble d'alimentation sorte vers un coté du bloc, ce coté sera le bas du purificateur d'air
  • Placez 8 ventilateurs face logo blanc visible et formez un rectangle 2x8. Visser avec 3x4 vis et 3 éléments Square les partie centrales composée de 4 ventilateurs. Répétez l'opération au dos de ces 8 ventilateurs avec 3x4 autres vis et 3 autres éléments Square
  • Sur le coté où les logos blancs sont visibles, visser avec 16 vis et 8 éléments Rectangle, sur chaque trous de vis entre 2 ventilateurs
  • Sur le coté où les logos blancs NE SONT PAS visibles, visser avec 3 vis, 1 Rectangle, 1 MammothD et 1 MammothE les 2 ventilateurs d'un des petits cotés du rectangle de ventilateurs, ce coté devenant le bas du purificateur d'air. Visser avec 3 vis, 1 Rectangle, 1 MammothB et 1 MammothC de l'autre coté du bloc de ventilateurs. Avec 12 vis visser 2 MammothA sur les parties centrales des deux longs cotés du rectangle de ventilateurs, et les relier aux autres pièces du MammothB/C/D/E avec les Rectangles. Visser toujours dans ce sens : vis => rectangle => MammothB/C/D/E => ventilateur.
  • Répétez les 3 dernières l'opération avec les 8 autres ventilateurs, 60 vis, 6 éléments Square, 14 éléments Rectangle, 2 pièces MammothA et 1 pièce MammothB, C, D et E.
  • Sur l'un des blocs de ventilateur, placer les filtres avec la mousse noire vers l'intérieur du purificateur. Puis placer l'autre bloc de ventilateur de façon à tenir l'ensemble
  • Insérer les 4 Pieds dans leurs emplacement puis effectuer un quart de tour (vous pouvez répéter l'opération pour les démonter)
  • De chaque coté, brancher les prises 3pin au répartiteur 3pin, puis ces 2 répartiteurs par 1 Splitter Molex, puis au bouton, enfin le bouton à l'alimentation ou à une batterie

Entretien : 

  • 6 mois si utilisé en condition standard H24/7-7 pour un filtre, remplacement pour 10€
  • 10 ans pour les ventilateurs

Consommation annuelle :


Prix électricité heures pleines à 0,246€ le MW/h  + 60€ de filtres tous les 300 jours d'utilisation (10 mois).

  • Utilisation "école" (8h/jour - 182 jours/an) : 24,94€
  • Utilisation "bureau" (10h/jour - 253 j/an) : 34,94€
  • Utilisation "commerce" (10/jour - 300 j/an) : 49,91€
     

Tags