Snap on suet ball holder for Birdfy Bamboo - Meisenködel Halter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.65 – €6.91 net (excluding VAT)
For file: large-bird-buddy-suet-ball-ALL PARTS -PRINT-MK35_0.4n_0.15mm_PETG_MK3.5MMU3_7h19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.28 excluding VAT (range midpoint).
- Weight reported by the author
- 61 g
- Print time reported by the author
- 7.32 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
To ad some fatball bird food holder to the birdfy bamboo feedercam or for other feeders.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 68
- Makes
- 1
- Views
- 575
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
I liked the design of the suet ball holder by @ivyMike, as his design allows to feed fat to the birds without the commonly used net around the suet ball.

Those nets are dangerous for small birds an. d unnecessary waste. So it is good if you don’t need those nets.
I own a Birdfy camera (Birdfy bamboo) and it is fun, to watch the birds coming by and eating the treats.
I added a very easy holder that clips on the wooden rod where the birds sit. It snaps on and has a little rim, so that it does not come off too easy (squirrels are thieves).



I printed it in PETG for it is for outdoor use (UV light exposed).
20% Infill
no supports needed.
I connected the mount with the bottom half of the ball with a 3mm stainless steel hexbolt and a M3 heat inserted thread. You can just glue them together with superglue if you donˋt have those metal parts.
Please show me your results and send me fotos of your makes. I like to see how you use this model. If you have ideas for improvement don’t hesitate to send them to me in the comments. I will try to incorporate your suggestions and will modify the model for special needs if you ask me to do so.
And of course a like ♥ or a rating ⭐ of the design are always welcome.
happy printing, clamikra
And here it is assembled and loaded with a suet ball
And this is how the Birdfy cam sees the ball (I have to clean the lens soon!)




