1 / 3
Knife Honing Steel Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A base to clamp down your knife honing rod if you want to practice the angle
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I made this Knife Honing Steel Holder in order to get the angle right and consistent over the full length. Right now, I just can't do it in mid air with a consistent angle and I feel more comfortable with a solid base and using two hands.
Print & Assembly
- Check the diameter of your honing steel and select the matching size of the model. If you are unsure if it fits, go one size bigger.
- Recommended screw size: M4x20. (At least M4x10, maximum size ist M4x25).
- When you clamp the steel into the holder, it will scratch some material off the print. Because it indirectly has contact with food, you want to avoid this. Easy fix: wrap a strip of kitchen paper / paper towel around the steel in the clamping area.